Canopus ADVC-300 User Manual download pdf (Page 19)

No.7 Standby setting

Allows you to set whether to use the standby feature (which detects

the signal coming from devices connected to the DV terminal).

OFF: Disable ON: Enable

* Standby feature

This feature turns ON/OFF the ADVC-300 power automatically af-

ter detecting ON/OFF of the power of the device connected to the

DV terminal.

You can use the [POWER] switch to turn ON/OFF the ADVC-300

power as usual even when the standby feature is active.

No.8 Operation Mode setting

Allows you to select the control method of ADVC-300.

OFF: UNIT ON: PC

* UNIT mode

In this mode, the ADVC-300 operates standalone, thus all the op-

erations are made via the buttons and indicators on it. To set the

operation mode, use the DIP switch for it. You can set up the qual-

ity of image and sound on the ADVC-300. This mode is provided

for using the ADVC-300 as a simple DV converter.

* PC mode

In this mode, the ADVC-300 is controlled by a computer connected

to it via the IEEE 1394 interface. Image and sound quality is con-

trolled from the computer. The buttons on the ADVC-300 are not

operable in this mode.

NOTE

When you use the standby fea-

ture, use either of the DV termi-

nal on the front or the one on the

rear, not both, for connecting your

device.

* Depending on the specification

of your device’s (computer’s)

DV terminal standby function

or the OHCI card specification,

the standby mode may not

work.

Operation Mode

The PC mode and UNIT mode are

available for your selection.

When changing the mode, be

sure to turn OFF the ADVC-300

power before setting the DIP

switch.

Tip

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 53 54

Comments to this Manuals

No comments

Canopus ADVC-300 User Manual Page 19

Comments to this Manuals