Canopus ADVC-300 User Manual download pdf (Page 20)

[SW2] DIP switches[SW2] DIP switches

[SW2] DIP switches

Allows you to make video and audio settings.

All the switches have been set to OFF at the time of shipment.

No.1 Video Audio Adjust Mode setting

Allows you to enable the adjustment on image and sound quality.

Usually, set this to [OFF: Normal] (Refer to P. 22).

OFF: Normal ON: Adjust

No.2 Chroma Filter Setting

Allows you to select the Chroma filter.

OFF: 1.3 MHz ON: 2.0 MHz

No.3 Component Level setting

Allows you to select the component level from SMPTE and BETACAM.

OFF: SMPTE ON: BETACAM

No.4 Aspect Ratio Enable setting

Allows you to enable the aspect ratio setting (No.5 Aspect Ratio

Select). If set to [OFF: Disable], the aspect ratio of “4:3” is used for

D1 output.

OFF: Disable ON: Enable

No.5 Aspect Ratio Select setting

Allows you to select the aspect ratio for D1 output.

OFF: 4:3 LetterBox ON: 16:9

No.6 Reserved

Not used (Usually, set it to [OFF].)

No.7 Reserved

Not used (Usually, set it to [OFF].)

The following functions are

changeable under the PC mode.

The set values are saved in the

ADVC-300's memory.

• Locked Audio Mode

([SW1] DIP switch No. 3)

• Audio Mode

([SW1] DIP switch No. 4)

The following functions are not

changeable from the PC.

• NTSC Setup Level

([SW1] DIP switch No. 5)

• Video Format

([SW1] DIP switch No. 6)

• Chroma Filter

([SW2] DIP switch No. 2)

• Component Level

([SW2] DIP switch No. 3)

• Aspect Ratio Enable

([SW2] DIP switch No. 4)

• Aspect Ratio Select

([SW2] DIP switch No. 5)

• Video Sync Mode

([SW2] DIP switch No. 8)

Tip

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

Comments to this Manuals

No comments

Canopus ADVC-300 User Manual Page 20

Comments to this Manuals