Canopus ADVC-1000 User Manual download pdf (Page 13)

Basic InstructionsBasic Instructions

Basic Instructions

Basic InstructionsBasic Instructions

Basic Instructions

Front Panel LEDs

x Mode indicator (LED)

When only the “SDI J DV” LED is lit, ADVC-1000 converts the

SDI video signal, SDI embedded audio signal or AES/EBU

audio signal to a DV signal. When only the “DV J SDI” LED is

lit, ADVC-1000 converts the DV signal to an SDI video signal,

SDI embedded audio signal and AES/EBU audio signal.

x STATUS LED

Off: ........................ 9-pin remote control is disabled.

Lit green: .............. 9-pin remote control is enabled.

Lit red: .................. 9-pin remote control was set to enabled, but

remote control is prevented by a communi-

cation error. Check that the 9-pin remote

cable is correctly connected, that the con-

nected device's power is ON, and that the

remote control setting has been enabled on

the connected device.

Flashing red: ........ A major ADVC-1000 operation error has oc-

curred, or several signals required for opera-

tion can't be detected. Check the error sta-

tus display screen. Input the required signals

correctly, or change ADVC-1000's settings.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

No comments

Canopus ADVC-1000 User Manual Page 13