Canopus ADVC-300 User Manual download pdf (Page 47)

Capturing analog video into computerCapturing analog video into computer

Capturing analog video into computer

NOTE

Do not turn ON/OFF the ADVC-

300 power when the computer

connected to the ADVC-300 via a

DV cable is OFF or in the standby

mode. Otherwise, your computer

may become unbootable depend-

ing on the OHCI card being used.

In this instance, disconnect the

ADVC-300 from the computer

temporarily, turn OFF and ON the

power of the computer, and then

connect the ADVC-300 to the

computer again.

Press the [POWER] switch on the rear.

By pressing the [INPUT SELECT] switch on the front,

switch the input mode to the ANALOG IN external

input mode.

> The ANALOG IN LED will light.

Playback the video you want to capture on the ana-

log VCR.

Capture the video on your computer.

> For how to capture the video on your computer, consult

the user's manual of the software you are using.

Audio sampling frequency during

capturing

In Line input selection: You can

select from 48 kHz (16-bit) and

32 kHz (12-bit). Select this set-

ting using the DIP switch or “Pic-

ture Controller 300”.

Tip

Recording analog video to DV cameraRecording analog video to DV camera

Recording analog video to DV camera

Press the [POWER] switch on the rear.

By pressing the [INPUT SELECT] switch on the front,

switch the input mode to the ANALOG IN external

input mode.

> The ANALOG IN LED will start light.

Put the DV camera in the record pause mode.

Playback the video you want to copy on the analog

VCR.

Release the pause button of the DV camera.

> The analog video will be copied to the DV camera.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53 54

Comments to this Manuals

No comments

Canopus ADVC-300 User Manual Page 47

Comments to this Manuals